The pictures used in this section may not look exactly like your robotic cleaner but troubleshooting procedures should work with your cleaner!

6. Untangle floating cable:

• Go to an area that you can stretch the cable to its entire length

• Place the Robot on the ground and unplug the cable from the power supply

• With one hand, holding the E-Z Swivel, walk away from the robot, pulling the cable to its full length. Turn the cable until it is free of knots and twists.

• If possible lay the cable in the sun for 10 to 15 minutes until it lays flat to the floor

• If the problem still exist, fill out a Service Request Form or call 1-800-457-7642 for additional help